Categories

Manufacturer:
KMtronic LTD

Features:
- Fully assembled and tested
- Fully powered from USB
- For 12V/24VDC 15A or 120V/220V AC at 10A max.
- Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE

USB to serial interface:
FTDI FT232RL Chip
www.ftdichip.com/Products/ICs/FT232R.htm

Complete including:
One USB relay board

Dimensions (PCB board):
90 mm / 35 mm

Relay specifications:
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable
of switching max:
- 12VDC/15A
- 24VDC/15A
- 125VAC/15A
- 250VAC/10A

Relay datasheed:
www.info.kmtronic.com/manuals/RAS.pdf

Supply:
Fully powered from USB

Operation Range:
0°C to +80°C

Drivers :
All Windows systems, Windows RT, Linux,
Mac OS 8, Mac OS 9, Mac OS X,
Android, Raspberry Pi, Arduino ADK,
Arduino with USB Host Shield...
www.ftdichip.com/FTDrivers.htm

Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600

Commands:
“FF 01 00” (HEX) or “255,1,0” (DEC) - OFF command
“FF 01 01” (HEX) or “255,1,1” (DEC) - ON command
“FF 01 03” (HEX) or “255,1,3” (DEC) - Status request
NOTE : Each command consists in 3 binary bytes (shown in hexadecimal below) without any space!

Windows Test software:
www.info.kmtronic.com/kmtronic-usb-relay-test-software.html

BOX Version:
www.info.kmtronic.com/usb-one-channel-relay-box.html

Customers projects:
www.info.kmtronic.com/kmtronic-customers-projects.html

Software Examples:
www.info.kmtronic.com/usb-rs232-rs485-relays.html

.

Published in Products

Be the first to comment!

Tuesday, 27 December 2011 13:13

Manuals

Written by Super User

RF433mhz 8 channel relay board

http://info.kmtronic.com/usb-rf433mhz-8-channel-relay-board.html

USB One Channel Relay

http://www.info.kmtronic.com/usb-one-relay-box.html

USB Relay Controller - One Channel BOX.pdf

http://info.kmtronic.com/usb-to-rs485-ftdi-interface-converter-pcb.html

USB Relay Controller - One Channel PCB.pdf

USB Two Channels Relay

http://info.kmtronic.com/usb-relay-controller-two-channels.html

USB Relay Controller - Two Channel.pdf

USB 4 Channels Relay

USB 4 Channels Relay Controller.pdf

USB 8 Channels Relay

http://info.kmtronic.com/usb-eight-channel-relay-controller-rs232-serial-controlled-12v.html

Eight Channel USB Relay Controller - RS232 Serial controlled - 12V

RS232 8 Channel Relay

RS232 Serial COM controlled Eight Channel Relay Board - 12V

2 Channel Relay

Two Relay board 5V
Two Relay board 12V
Two Relay board 24V

4 Channel Relay

Four Relay board 5V
Four Relay board 12V

8 Channel Relay

Eight Relay board 5V
Eight Relay board 12V
Eight Relay board 24V

USB<>RS485 Adapter

http://info.kmtronic.com/usb-to-rs485-ftdi-interface-converter-box.html

USB to RS485 FTDI interface Board BOX

http://info.kmtronic.com/usb-to-rs485-ftdi-interface-converter-pcb.html

USB to RS485 FTDI interface Board PCB

RS485 8 Channel Relay

RS485 8 Channel Relay Board, RS485

RS485 Output Controller

RS485 to 8 Digitally Outputs controller

USB EEPROM programmer

USB KEEProg E-Eprom programmer

USB 24xxx EEPROM programmer

USB 24xxx I2C E-Eprom programmer

USB 25xxx EEPROM programmer

USB 25xxx SPI Bus E-Eprom programmer

RS485 Output Controller

RS232 serial 8 Digital Channel Output Modul

USB FTDI UART TTL Controller

USB to serial UART FTDI interface Board

DINo Internet Ethernet Relay IO board

DINo Internet Ethernet Relay IO board

Published in KMTronic

Be the first to comment!

Tuesday, 27 December 2011 11:32

USB One Channel Relay BOX

Written by Super User

KMtronic USB One Channel Relay

A general purpose Relay board for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus.

Manufacturer:
KMtronic LTD

Features:
- Fully assembled and tested
- Fully powered from USB
- For 12V/24VDC 15A or 120V/220V AC at 10A max.
- Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE

USB to serial interface:
FTDI FT232RL Chip
www.ftdichip.com/Products/ICs/FT232R.htm

Complete including:
One USB relay board

Dimensions:
100 mm / 58 mm / 24 mm

Relay specifications:
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable
of switching max:
- 12VDC/15A
- 24VDC/15A
- 125VAC/15A
- 250VAC/10A

Relay datasheed:
www.info.kmtronic.com/manuals/RAS.pdf

Supply:
Fully powered from USB

Operation Range:
0°C to +80°C

Drivers :
All Windows systems, Windows RT, Linux,
Mac OS 8, Mac OS 9, Mac OS X,
Android, Raspberry Pi, Arduino ADK,
Arduino with USB Host Shield...
www.ftdichip.com/FTDrivers.htm

Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600

Commands:
“FF 01 00” (HEX) or “255,1,0” (DEC) - OFF command
“FF 01 01” (HEX) or “255,1,1” (DEC) - ON command
“FF 01 03” (HEX) or “255,1,3” (DEC) - Status request
NOTE : Each command consists in 3 binary bytes (shown in hexadecimal below) without any space!

Windows Test software:
www.info.kmtronic.com/kmtronic-usb-relay-test-software.html

PCB Version:
www.info.kmtronic.com/usb-one-channel-relay-pcb.html

Customers projects:
www.info.kmtronic.com/kmtronic-customers-projects.html

Software Examples:
www.info.kmtronic.com/usb-rs232-rs485-relays.html

.

Published in Products

Be the first to comment!

Thursday, 22 December 2011 18:29

Welcome

Written by Super User

Welcome to KMtronic.

WEB LAN Relays, USB Relays, RS232 Relays, RS485 Relays, programmers, electronics boards and components.

Here you will find useful information on all kinds of hardware and software associated questions and topics.

Step by step instructions on how to install, connect, and control a whole spectrum of computer related devices.

Controlling multiple KMtronic WEB Relays Boards by Node-RED

https://info.kmtronic.com/controlling-multiple-kmtronic-relays-board-by-node-red.html

KMTronic Plug-in and Creating Devices on HomeSeer HS3

https://info.kmtronic.com/kmtronic-plug-in-and-creating-devices-on-homeseer-hs3.html

Testing Heatmiser EDGE ModBus Thermostat
with ModbusMAT freeware program

Testing Heatmiser EDGE ModBus Thermostat with ModbusMAT freeware program and KMtronic USB<>RS485 adapter

https://info.kmtronic.com/testing-heatmiser-edge-modbus-thermostat-with-modbusmat-freeware-program.html

Home Automation and Smart Home Systems

www.control4.com

A home automation system from Control4
can turn your home into a smart home.

Control4 compatible products
(drivers avaiable)

https://sigma-shop.com/category/35/control4.html

Home Assistant

Configuration file for KMtronic ModBus Temperature Monitor

Home Assistant: KMtronic ModBus Temperature Monitor

https://info.kmtronic.com/working-home-assistant-configuration-file-for-kmtronic-modbus-temperature-monitor.html

APT (Astro Photography Tool)

added support Canon/Nikon KMTronic based

shutter cable

APT (Astro Photography Tool) added support Canon/Nikon KMTronic based shutter cable

https://info.kmtronic.com/apt-astro-photography-tool-added-support-canon-nikon-kmtronic-based-shutter-cable.html

Plc Temp Monitor for Android
Developer: Vincenzo Scozzaro

https://play.google.com/store/apps/details?id=com.zenoapp.PlcTempMonitor&hl=pt-br

Temperature Monitoring System

Domoticz lua script to convert XML output from KMtronic DS1820 LAN module

www.info.kmtronic.com/domoticz-lua-script-to-convert-xml-output-from-kmtronic-ds1820-lan-module.html

Domoticz Home Automation System

Domoticz is a very light weight home automation system that lets you monitor and configure miscellaneous devices, including lights, switches, various sensors/meters like temperature, rainfall, wind, ultraviolet (UV) radiation, electricity usage/production, gas consumption, water consumption and many more. Notifications/alerts can be sent to any mobile device.

Free / Open Source
Linux / Windows / Embedded Devices

www.Domoticz.com

More information:

http://info.kmtronic.com/domoticz-home-automation-system.html

28 April 2016 Control4 KMtronic Web Temperature Monitor Driver by Soft.Kiwi

29 October 2015 Controlling KMtronic UDP Relays by Loxone Home Automation Miniserver
(thank you David)

13 October 2015 Control4 KMtronic WEB IP Relay Driver by Soft.Kiwi

02 August 2015 Control KMtronic USB relays using Command Prompt BIN files

15 July 2015 New product: Opto Isolated USB to RS485 FTDI Interface Converter

13 July 2015 LAN DS18B20 Temperature Monitor Excel and Visual Basic examples

10 July 2015 New product: LAN DS18B20 High-Precision 1-Wire Digital Temperature Monitor

18 June 2015 Control KMtronic WEB relays using Browser Bookmarks

16 June 2015 ModbusTools and KMtronic Modbus TCP Relay board

12 June 2015 RS485 ModBus Relays via Loxone Miniserver and ModBus extension

05 June 2015 Read Status xml KMtronic WEB LAN relays

03 June 2015 Control KMtronic UDP LAN relays via Packet Sender Softrware

01 June 2015 Control KMtronic USB, RS485, RS232 relay boards via EXCEL files

27 May 2015 Control KMtronic USB, RS485, RS232 relay boards via BAT files

26 May 2015 DINo board is back in stock

23 May 2015 Domoticz supports the KMTronic USB and TCP(Web) relay boards

19 May 2015 Aria G25 Linux Embedded module by Acme Systems srl

Published in KMTronic

Be the first to comment!

Thursday, 22 December 2011 15:10

FTDI Virtual COM Port Drivers installation

Written by Super User

You have to download the drivers from FTDI website - http://www.ftdichip.com/Drivers/VCP.htm

Unzip it to your own folder.

FTDI Drivers

When you connect the USB board, the following message appears: FOUND NEW HARDWARE and drives need to be installed.

The red and green LED flashes 2,3 times and turn off. When the red LED and the green LED flashes means that there is a communication between the USB relay and PC.

FTDI Drivers

After the drivers' installed, an additional COM port appears in the Device Manager of Windows - usually it is COM3:

Online Shop

Software examples

KMTronic USB Relay Test software

KMtronic USB 8 Relay software

RS485 Relays commands

KMTronic USB One Relay Linux Test script

KMtronic One Relay Timer software

DSP Robotics FlowStone example

Labview example (thanks Siva)

MATLAB example (thanks Dr Dean Rose)

Windows Shortcut example for switching on and off the KMTronic USB One Relay

Windows Command Line example

Linux example

The Perl example(thanks Pascal)

The python library(thanks David)

Macintosh example

Abacom ProfiLAB example

Sample Visual Basic code

Controlling USB Relay via Microsoft Office PowerPoint

Sample VB NET 2010 software (incl. source code)

Sample C# NET 2010 software (incl. source code)

Sample C# code

Sample php files

How to control KMtronic USB relays from Mach3

A tutorial showing how to set up GBTimelapse to control the Dynamic Perception MX2 Dolly using a USB relay

Controlling USB Relay via Macro Express

Controlling RS485 Relays by Raspberry Pi

Control KMTronic relays with CVI/Labwindows

Control KMTronic relays with Vixen lighting automation software

WEB Controlled

LAN Ethernet IP 2 channels WEB Relay board

2 WEB Relay board Sample software C# NET 2010 (incl. source code)

2 WEB Relay board Sample software VB NET 2010 (incl. source code)

2 WEB Relay board PHP Library

Control KMtronic LAN WEB Relay board via PHP

PLC 2 relay remote control net for Android

MyDomotica (Android home automation software)

Controlling WEb 2 Relay board using BAT Files

LAN Ethernet IP 8 channels WEB Relay board

8 WEB Relay board Sample software C# NET 2010 (incl. source code)

8 WEB Relay board PHP Library (thanks Scott)

MyDomotica (Android home automation software)

PLC 8 relay remote control net for Android

PLC 8 relay remote control net for for iPhone and iPad

UDP Controlled

LAN Ethernet IP 2 channels UDP controlled Relay board

LAN Ethernet IP 8 channels UDP controlled Relay board

KMTronic UDP Test Software

Capture UDP commands via Wireshark network protocol loger analyzer

Socat UDP control (Windows, Linux, AIX, BSD, HP-UX, Solaris e.a.)

Controlling UDP Relay Boards from Macro Express

Controlling UDP Relay boards using PHP Files