
Software examples (72)
Children categories
KMTronic Plug-in for LAN 2/4/8 Channel Relays on HomeSeer HS4
Written by kmtronic
Plugin for controlling IP/IoT/WEB/USB relay and input boards and controllers.
Flexible plugin architecture allows the plugin author to easily add device support. Please post your requirements in the support forum.
Main Features
- KMTronic WEB/UDP LAN Ethernet IP 2/4/8 Channels Relay Controllers
Included
- Software License Codes
Requirements
- HomeSeer HS4-Powered System
- Compatible with Windows and Linux
Links
Controlling multiple KMTronic Relays Boards by Node-RED
Written by Super UserNode-RED Example
https://github.com/kmtronic-ltd/node-red-example/
This is a node-red flow for controlling a couple of a KMTronic TCP Web Switch including and a Temperature Monitor
Node-Red https://nodered.org/
This flow requires from the Pallet Manager
Dashboard - node-red-dashboard
Every HTTP request will have to be edited with the IP address of your KMTronic WEB Switch (not UDP switch). Change 192.168.110.206,212 and 202 to the address of your KMTronic board/boards. If you don't have more than one board you can remove the rest.
Switch 6 is a PTT switch and by pressing it, it will toggle on Switch 6 for 1 second - you can delete it if not required
In the initial setup of your KMtronic switch turn off any authentication.
Credits Michael Walker
KMTronic Plug-in and Creating Devices on HomeSeer HS3
Written by kmtronic
KMTronic Plug-in and Creating Devices on HomeSeer HS3
We already have a plug-in for Sonoff's with Tasmota firmware which works great and we use it all the time, but sometimes WiFi isn't good enough especially for controls outside of the home or in a situation where reliability is important. For these cases we introduce the KMTronic Web Relay, an Ethernet based 8 relay device with optional DIN mounting. With the Web Relay we can control 8 individual relays using HomeSeer and our KMT Plug-in. We already use these both inside and outside of the building and find them very reliable and cost effective especially as compared to devices such as the Adam 6060 at 5 times the price. Likewise, sometimes temperature measurement is required with a degree of reliability and flexibility, such as monitoring external temperature, or water temperature. The one-wire DS18B20 is an established and reliable sensor available in many form factors and each LAN-DS1820 unit can support up to 4 of these.
https://shop.homeseer.com/products/dsl-kmtronic-software-plug-in-for-hs3
User Guide
https://www.gen.net.uk/kmtronic-homeseer
Main Features
-
- Digital Output and DS1820 Temperature Monitoring
- Ethernet (Wired) for reliability
- TCP/IP Protocol
- Monitored units with error handling
- Queue based processing to avoid loading HS3
What's Included
-
- Software License Codes
Requirements
-
- HomeSeer HS3 or HS3PRO
- Compatible with Windows
- KMTronic Devices (either Web Relay or LAN DS18B20 WEB Temperature Monitor or both)
Testing Heatmiser EDGE ModBus Thermostat with ModbusMAT freeware program
Written by kmtronic
Heatmiser EDGE ModBus Thermostat
Protocol:
EDGE SERIES MODBUS COMMUNICATION PROTOCOL V1.8
Communication protocol:
1. UART Baud Rate: 9600
2. UART Parity: None
3. Communications ID Rang:0-32 ,255
Heatmiser EDGE
The Heatmiser EDGE is 230v powered Thermostat that is compatible with the Heatmiser wireless air sensor and wireless door/window switch. The wireless air sensor function is perfect for those looking to measure the temperature in another location and for those with larger open plan properties, multiple air sensors can be used to create an average temperature.
The Heatmiser EDGE can be set to work as a non programmable, 5/2 day, 7 day or 24 hour programmable thermostat.
230V Powered
Wireless Air Sensor Function
Modbus Network Function
Testing Heatmiser EDGE ModBus Thermostat with ModbusMAT freeware program and KMtronic USB<>RS485 adapter
Testing Heatmiser EDGE ModBus Thermostat with ModbusMAT freeware program and KMtronic USB<>RS485 adapter
Testing Heatmiser EDGE ModBus Thermostat with ModbusMAT freeware program and KMtronic USB<>RS485 adapter
Testing Heatmiser EDGE ModBus Thermostat with ModbusMAT freeware program and KMtronic USB<>RS485 adapter
Working Home Assistant configuration file for KMtronic ModBus Temperature Monitor
Written by kmtronic
"configuration.yaml"
Working file for KMtronic ModBus Temperature Monitor
homeassistant:
# Name of the location where Home Assistant is running
name: Home
# Location required to calculate the time the sun rises and sets
latitude: 43.123777
longitude: 25.688826
# Impacts weather/sunrise data (altitude above sea level in meters)
elevation: 542
# metric for Metric, imperial for Imperial
unit_system: metric
# Pick yours from here: http://en.wikipedia.org/wiki/List_of_tz_database_time_zones
time_zone: Europe/Sofia
# Customization file
customize: !include customize.yaml
# Show links to resources in log and frontend
introduction:
# Enables the frontend
frontend:
# Enables configuration UI
config:
http:
# Secrets are defined in the file secrets.yaml
# api_password: !secret http_password
# Uncomment this if you are using SSL/TLS, running in Docker container, etc.
# base_url: example.duckdns.org:8123
# Checks for available updates
# Note: This component will send some information about your system to
# the developers to assist with development of Home Assistant.
# For more information, please see:
# https://home-assistant.io/blog/2016/10/25/explaining-the-updater/
updater:
# Optional, allows Home Assistant developers to focus on popular components.
# include_used_components: true
# Discover some devices automatically
discovery:
# Allows you to issue voice commands from the frontend in enabled browsers
conversation:
# Enables support for tracking state changes over time
history:
# View all events in a logbook
logbook:
# Enables a map showing the location of tracked devices
map:
# Track the sun
sun:
# Text to speech
tts:
- platform: google
modbus:
type: tcp
host: 192.168.1.210
port: 502
sensor:
platform: modbus
registers:
- name: Sensor3
unit_of_measurement: °C
slave: 1
register: 0
count: 2
register_type: input
data_type: float
precision: 2
device_tracker:
- platform: ping
interval_seconds: 30
consider_home: 1200
hosts:
josh_iphone: 192.168.1.105
my_tablet: 192.168.1.168
group:
living_room:
- light.bowl
- light.ceiling
- light.tv_back_light
entities:
- light.bedroom
- media_player.nexus_player
scene:
- name: Romantic
entities:
light.tv_back_light: on
light.ceiling:
state: on
xy_color: [0.33, 0.66]
brightness: 200
- name: Movies
entities:
light.tv_back_light:
state: on
brightness: 100
light.ceiling: off
media_player.sony_bravia_tv:
source: HDMI 1
#group: !include groups.yaml
automation: !include automations.yaml
script: !include scripts.yaml
"
Home Assistant: KMtronic ModBus Temperature Monitor
Home Assistant: KMtronic ModBus Temperature Monitor
APT (Astro Photography Tool) added support Canon/Nikon KMTronic based shutter cable
Written by kmtronic
APT (Astro Photography Tool) added support Canon/Nikon KMTronic based shutter cable
https://ideiki.com/astro/usersguide/kmtronic_cable.htm
Controlling KMTronic RS485 Relay boards using BAT Files
Written by Super User
http://sigma-shop.com/rs485-relays.html
Download ZIP file
http://www.info.kmtronic.com/software/RS485_Relays/RS485_Relays_Command_Prompt.zip
Unzip in any folder
in example "D:\KMtronic"
Quick help
rs485relays.exe COM<COM port> <COMMAND>
COM port: COM port
COMMAND: RS485 Relays commands (http://info.kmtronic.com/kmtronic-rs485-relays-commands.html)
NOTE: Commands must be without space (intervals).
Commands examples
rs485relays.exe COM5 FF0101 (this will turn on channel 1 board connected to COM:5)
rs485relays.exe COM5 FF0100 (this will turn off channel 1 board connected to COM:5)
Controlling KMTronic UDP Relays by Loxone Home Automation Miniserver
Written by Super UserControl KMtronic USB relays using Command Prompt BIN files
Written by Super User
Example file for COM Port 1 (COM1)
@echo off
cls
echo "--------------------------------------"
echo " KMtronic USB One Relay "
echo " example "
echo " "
echo " "
echo " "
echo " ON Command : 0xFF, 0x01, 0x01 "
echo " "
echo " OFF Command : 0xFF, 0x01, 0x00 "
echo " "
echo "--------------------------------------"
echo FF0100>off.txt
echo FF0101>on.txt
certutil -decodehex off.txt off.bin
certutil -decodehex on.txt on.bin
MODE COM1:9600,n,8,1
copy on.bin \\.\com1 /b
echo " Relay is ON"
copy off.bin \\.\com1 /b
echo " Relay is OFF"
del on.bin
del off.bin
del on.txt
del off.txt
Download
www.info.kmtronic.com/software/USB_Relays/KMtronic_USB_Relay_Command_Prompt.zip
Control KMtronic LAN relays using Browser Bookmarks
Written by Super User
Google Chrome Example
Click on the right top corner to open the Bookmark Manager or simple click Ctrl+Shift + O
copy this to the empty field : http://admin:This email address is being protected from spambots. You need JavaScript enabled to view it./FF0101
and change the user name and password with yours and change the IP address
same thing for OFF command just replace the FF0101 with FF0100
http://admin:This email address is being protected from spambots. You need JavaScript enabled to view it./FF0100