All_Products (213)
RS232 Serial COM controlled Eight Channel Relay Board
Written by kmtronic
The complete includes:
- One RS232 output (12V)
Required power:
12VDC / minimum 600 mA.
Standby current:
(Relays OFF) - 21 mA
One Relay ON - 57 mA
Two Relays ON - 91mA
All Relays ON - 300 mA
Model:
R2S8CR
Features:
- Each relay has an LED to indicate when it is operated.
- Relay outputs can be used to turn ON/OFF lights, motors and other devices.
Specifications:
Relays have Normally Open (NO) and Normally Closed (NC) Contacts each capable of switching max:
- 12VDC/15A
- 24VDC/15A
- 125VAC/15A
- 250VAC/10A
Dimensions:
http://info.kmtronic.com/KMtronic-8Relay-Dimension.pdf
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
FIRST channel commands:
OFF command : FF 01 00 (HEX) or 255 1 0 (DEC)
ON command : FF 01 01 (HEX) or 255 1 1 (DEC)
...
...
...
EIGHT channel commands:
OFF command : FF 08 00 (HEX) or 255 8 0 (DEC)
ON command : FF 08 01 (HEX) or 255 8 1 (DEC)
Software examples:
http://www.info.kmtronic.com/usb-rs232-rs485-relays.html
KMTronic USB > RF433MHz > 8 Channel Relay Board (controller)
Written by Super User
USB > RF433MHz > 8 Channel Relay Board
Drivers
are available to work with the following operating systems :
All Windows versions, Linux, Mac OS X, Mac OS 9, Mac OS 8,
Windows CE.NET (Version 4.2 and greater), Arduino, Raspberry Pi ...
Required power:
12VDC / minimum 600 mA.
Wireless Data Transmittion Module:
CC1101 Low-Power RF Transceiver
(Texas Instruments)
USB Converter:
CDC USB to Serial Converter
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands (ID01):
FIRST channel commands:
OFF command : FF 01 00 (HEX) or 255 1 0 (DEC)
ON command : FF 01 01 (HEX) or 255 1 1 (DEC)
...
EIGHT channel commands:
OFF command : FF 08 00 (HEX) or 255 8 0 (DEC)
ON command : FF 08 01 (HEX) or 255 8 1 (DEC)
Status read (ID01):
Command - FF A1 00
Reply - FF A1 xx xx xx xx xx xx xx xx
where xx is: 00 if relay is OFF, 01 if relay is ON
ID:
Relay board have an option to change the ID (from ID 01 to ID 15) manually
through a DIP Switch placed near power connector.
Distance:
In open area max 350 meters
KMTronic RF433MHz Relay Boards Installation Guide
KMTronic_RF433_Installation_Guide.pdf
KMTronic LAN Ethernet IP 2 channels UDP Relay board
Written by Super User
Manufacturer:
KMTronic LTD
Features:
- Each relay has an LED to indicate when it is operated.
- Relay outputs can be used to turn ON/OFF lights, motors and other devices.
Specifications:
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable of switching max:
- 12VDC/15A
- 24VDC/15A
- 125VAC/15A
- 250VAC/10A
Supply:
Requires external 12 volt DC / 500mA power supply
Operation Range:
Industrial (0°C to +80°C)
Dimensions:
105 mm / 51 mm / 20 mm (connectors mounted)
Default:
IP address: 192.168.1.199
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
UDP Port: 12345
UDP Commands:
FF0000 - Status Read command
FF0100 - Relay 1 OFF command
FF0101 - Relay 1 ON command
FF0200 - Relay 2 OFF command
FF0201 - Relay 2 ON command
FFE000 - All relays OFF command
FFE003 - All relays ON command
UDP Test Software example including source code (C#):
KMTronic UDP Test Software.zip
KMTronic UDP Test Software Source Code.zip
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus. Free download USB relay board control software.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Dimensions:
100 mm / 62 mm / 26 mm
Typical Applications:
- Home automation
- Industrial automation
Links:
Manual - http://www.sigma-shop.com/manuals/USB_Two_Relay manual.pdf
Drivers - http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
Windows Server 2008 R2, Windows 7, Windows 7 x64, Windows Server 2008,
Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows Server 2003 x64, Windows XP, Windows XP x64, Windows 2000, Windows ME,
Windows 98, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
- FIRST relay commands:
"FF 01 00" - OFF command
"FF 01 01" - ON command
- SECOND relay commands:
"FF 02 00" - OFF command
"FF 02 01" - ON command
You can find this in our Web Shop.
Meta tags: usb channel control, usb circuit relay, usb comand a realy, usb computer controlled relays, usb connection relay, usb connection to relay card, usb control boards, usb control device, usb controled relay, usb controler 12v, usb controllable relay card, usb controlled bnc relay, usb controlled dc relay, usb controlled relay board, usb controlled relay linux, usb controller rs232, usb controller с реле, usb detect relay contact, usb device command relay, usb device control by pc (relay), usb easy relay
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus. Free download USB relay board control software.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Dimensions:
100 mm / 62 mm / 26 mm
Typical Applications:
- Home automation
- Industrial automation
Links:
Manual - http://www.sigma-shop.com/manuals/USB_Two_Relay manual.pdf
Drivers - http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
Windows Server 2008 R2, Windows 7, Windows 7 x64, Windows Server 2008,
Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows Server 2003 x64, Windows XP, Windows XP x64, Windows 2000, Windows ME,
Windows 98, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
- FIRST relay commands:
"FF 01 00" - OFF command
"FF 01 01" - ON command
- SECOND relay commands:
"FF 02 00" - OFF command
"FF 02 01" - ON command
You can find this in our Web Shop.
Meta tags: usb channel control, usb circuit relay, usb comand a realy, usb computer controlled relays, usb connection relay, usb connection to relay card, usb control boards, usb control device, usb controled relay, usb controler 12v, usb controllable relay card, usb controlled bnc relay, usb controlled dc relay, usb controlled relay board, usb controlled relay linux, usb controller rs232, usb controller с реле, usb detect relay contact, usb device command relay, usb device control by pc (relay), usb easy relay
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus. Free download USB relay board control software.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Dimensions:
100 mm / 62 mm / 26 mm
Typical Applications:
- Home automation
- Industrial automation
Links:
Manual - http://www.sigma-shop.com/manuals/USB_Two_Relay manual.pdf
Drivers - http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
Windows Server 2008 R2, Windows 7, Windows 7 x64, Windows Server 2008,
Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows Server 2003 x64, Windows XP, Windows XP x64, Windows 2000, Windows ME,
Windows 98, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
- FIRST relay commands:
"FF 01 00" - OFF command
"FF 01 01" - ON command
- SECOND relay commands:
"FF 02 00" - OFF command
"FF 02 01" - ON command
You can find this in our Web Shop.
Meta tags: usb channel control, usb circuit relay, usb comand a realy, usb computer controlled relays, usb connection relay, usb connection to relay card, usb control boards, usb control device, usb controled relay, usb controler 12v, usb controllable relay card, usb controlled bnc relay, usb controlled dc relay, usb controlled relay board, usb controlled relay linux, usb controller rs232, usb controller с реле, usb detect relay contact, usb device command relay, usb device control by pc (relay), usb easy relay
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus. Free download USB relay board control software.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Dimensions:
100 mm / 62 mm / 26 mm
Typical Applications:
- Home automation
- Industrial automation
Links:
Manual - http://www.sigma-shop.com/manuals/USB_Two_Relay manual.pdf
Drivers - http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
Windows Server 2008 R2, Windows 7, Windows 7 x64, Windows Server 2008,
Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows Server 2003 x64, Windows XP, Windows XP x64, Windows 2000, Windows ME,
Windows 98, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
- FIRST relay commands:
"FF 01 00" - OFF command
"FF 01 01" - ON command
- SECOND relay commands:
"FF 02 00" - OFF command
"FF 02 01" - ON command
You can find this in our Web Shop.
Meta tags: usb channel control, usb circuit relay, usb comand a realy, usb computer controlled relays, usb connection relay, usb connection to relay card, usb control boards, usb control device, usb controled relay, usb controler 12v, usb controllable relay card, usb controlled bnc relay, usb controlled dc relay, usb controlled relay board, usb controlled relay linux, usb controller rs232, usb controller с реле, usb detect relay contact, usb device command relay, usb device control by pc (relay), usb easy relay
KMTronic Build Your Own USB Two Relay Controlled Switch
Written by Super User
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus. Free download USB relay board control software.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Dimensions:
100 mm / 62 mm / 26 mm
Typical Applications:
- Home automation
- Industrial automation
Links:
Manual - http://www.sigma-shop.com/manuals/USB_Two_Relay manual.pdf
Drivers - http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
Windows Server 2008 R2, Windows 7, Windows 7 x64, Windows Server 2008,
Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows Server 2003 x64, Windows XP, Windows XP x64, Windows 2000, Windows ME,
Windows 98, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
- FIRST relay commands:
"FF 01 00" - OFF command
"FF 01 01" - ON command
- SECOND relay commands:
"FF 02 00" - OFF command
"FF 02 01" - ON command
You can find this in our Web Shop.
Meta tags: usb channel control, usb circuit relay, usb comand a realy, usb computer controlled relays, usb connection relay, usb connection to relay card, usb control boards, usb control device, usb controled relay, usb controler 12v, usb controllable relay card, usb controlled bnc relay, usb controlled dc relay, usb controlled relay board, usb controlled relay linux, usb controller rs232, usb controller с реле, usb detect relay contact, usb device command relay, usb device control by pc (relay), usb easy relay
KMTronic Linux Two Relay card that will turn on and off lights
Written by Super User
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus. Free download USB relay board control software.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Dimensions:
100 mm / 62 mm / 26 mm
Typical Applications:
- Home automation
- Industrial automation
Links:
Manual - http://www.sigma-shop.com/manuals/USB_Two_Relay manual.pdf
Drivers - http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
Windows Server 2008 R2, Windows 7, Windows 7 x64, Windows Server 2008,
Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows Server 2003 x64, Windows XP, Windows XP x64, Windows 2000, Windows ME,
Windows 98, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
- FIRST relay commands:
"FF 01 00" - OFF command
"FF 01 01" - ON command
- SECOND relay commands:
"FF 02 00" - OFF command
"FF 02 01" - ON command
You can find this in our Web Shop.
Meta tags: usb channel control, usb circuit relay, usb comand a realy, usb computer controlled relays, usb connection relay, usb connection to relay card, usb control boards, usb control device, usb controled relay, usb controler 12v, usb controllable relay card, usb controlled bnc relay, usb controlled dc relay, usb controlled relay board, usb controlled relay linux, usb controller rs232, usb controller с реле, usb detect relay contact, usb device command relay, usb device control by pc (relay), usb easy relay
KMTronic Ubuntu Two Relay card that will turn on and off lights
Written by Super User
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control external devices using simple RS232 commands. Relay is fully powered from the USB bus. Free download USB relay board control software.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Dimensions:
100 mm / 62 mm / 26 mm
Typical Applications:
- Home automation
- Industrial automation
Links:
Manual - http://www.sigma-shop.com/manuals/USB_Two_Relay manual.pdf
Drivers - http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
Windows Server 2008 R2, Windows 7, Windows 7 x64, Windows Server 2008,
Windows Server 2008 x64, Windows Vista, Windows Vista x64, Windows Server 2003,
Windows Server 2003 x64, Windows XP, Windows XP x64, Windows 2000, Windows ME,
Windows 98, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
- FIRST relay commands:
"FF 01 00" - OFF command
"FF 01 01" - ON command
- SECOND relay commands:
"FF 02 00" - OFF command
"FF 02 01" - ON command
You can find this in our Web Shop.
Meta tags: usb channel control, usb circuit relay, usb comand a realy, usb computer controlled relays, usb connection relay, usb connection to relay card, usb control boards, usb control device, usb controled relay, usb controler 12v, usb controllable relay card, usb controlled bnc relay, usb controlled dc relay, usb controlled relay board, usb controlled relay linux, usb controller rs232, usb controller с реле, usb detect relay contact, usb device command relay, usb device control by pc (relay), usb easy relay
- You are here:
- Home
- Categories
- All_Products