KMTronic LAN Ethernet IP 8 channels WEB Relay board

 

 

 

 

Manufacturer:
KMTronic LTD

 

Features:
- Each relay has an LED to indicate when it is operated.
- Relay outputs can be used to turn ON/OFF lights, motors and other devices.

 

Specifications:
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable of switching max:
- 12VDC/15A
- 24VDC/15A
- 125VAC/15A
- 250VAC/10A

 

Relays Datasheet:
http://www.info.kmtronic.com/manuals/RAS.pdf

 

Standby current:
(Relays OFF) - 58mA
One Relay on - 92mA
All Relays on - 400mA

 

Supply:
Requires external 12 volt DC / 1000mA power supply

 

Operation Range:
Industrial (0°C to +80°C)

 

Dimensions:
108 mm / 150 mm / 25 mm (connectors mounted)

 

Default:
IP address: 192.168.1.199
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Username: admin
Password: admin

 

Reset to Default Settings:
Hold Reset button for 10 seconds

 

http://www.info.kmtronic.com/e-mobile/web-8relay-box-mobile-12.jpg


Installation:

(1)

Connect power and LAN cable to router.

Open any Internet explorer and type: 192.168.1.199

If explorer open new window with request for USER and PASSWORD this is all.

If not ...

 

(2)

Check that IP your router LAN is 192.168.1.1

http://info.kmtronic.com/how-to-find-your-local-ip-address.html

If LAN IP your router is different that 192.168.1.1 (192.168.0.1 or 192.168.10.1) you need one time access to network 192.168.1.1 to change default settings.

 

(3)

Open any Internet explorer and type: 192.168.1.199

KMTronic IP 2 Relay

 

KMTronic IP 2 Relay

 

KMTronic IP 2 Relay

 

 

 

Toggle Commands


yourIP/relays.cgi?relay=1 - Toggle relay 1
yourIP/relays.cgi?relay=2 - Toggle relay 2
yourIP/relays.cgi?relay=3 - Toggle relay 3
yourIP/relays.cgi?relay=4 - Toggle relay 4
yourIP/relays.cgi?relay=5 - Toggle relay 5
yourIP/relays.cgi?relay=6 - Toggle relay 6
yourIP/relays.cgi?relay=7 - Toggle relay 7
yourIP/relays.cgi?relay=8
- Toggle relay 8



HEX-Binary Commands


ON Commands:
yourIP/FF0101 - Turn ON relay 1
yourIP/FF0201 - Turn ON relay 2
yourIP/FF0301 - Turn ON relay 3
yourIP/FF0401 - Turn ON relay 4
yourIP/FF0501 - Turn ON relay 5
yourIP/FF0601 - Turn ON relay 6
yourIP/FF0701 - Turn ON relay 7
yourIP/FF0801 - Turn ON relay 8

OFF Commands:
yourIP/FF0100 - Turn OFF relay 1
yourIP/FF0200 - Turn OFF relay 2
yourIP/FF0300 - Turn OFF relay 3
yourIP/FF0400 - Turn OFF relay 4
yourIP/FF0500 - Turn OFF relay 5
yourIP/FF0600 - Turn OFF relay 6
yourIP/FF0700 - Turn OFF relay 7
yourIP/FF0800 - Turn OFF relay 8

 


All relays command:
yourIP/FFE0xx

xx - HEX representaion of relays state
MSB - relay8
LSB - relay1

Example:
xx = A6; //0xA6 HEX
0xA6 as binary: 10100110

=>
MSB                         LSB
1   0   1   0   0   1   1   0
r8  r7  r6  r5  r4  r3  r2  r1
on  off on  off off on  on  off

 

 

 

 

 

 

Read 51218 times